Lotion pump is a common liquid pump widely used in cosmetics, food, medicine and other industries. In order to ensure the normal operation of the lotion pump and extend its service life, it is very important to perform regular maintenance and cleaning. This article will introduce some tips for maintaining and cleaning lotion pumps to help you take better care of your lotion pump.
Lotion pumps often come into contact with various types of liquid cosmetics, such as facial creams, shower gels, etc. These products often contain grease, moisture, and other chemical additives. When left inside or on the surface of the pump, they may cause bacterial growth and affect product quality and consumer health. Therefore, regular and thorough cleaning and maintenance are critical steps to ensure the proper functioning of your lotion pump and product safety.
1. Steps and techniques for cleaning lotion pump:
Preparation: Before cleaning, remove the lotion pump from its container and completely empty the pump of any remaining lotion. You can turn the lotion pump upside down and gently press out the remainder.
Break down the lotion pump: Most lotion pumps are composed of pump body, piston, sealing ring and nozzle. Depending on the pump type, carefully disassemble it according to the instructions, and be careful to save each small part to avoid loss.
Clean the pump body: Rinse the pump body with warm water to remove most residues. You can add an appropriate amount of neutral detergent and gently brush the inner and outer walls with a soft brush to remove grease and sediment.
Clean other parts: For small parts such as pistons and sealing rings, it is recommended to clean them manually to avoid damage due to strong friction. Also use a mild detergent to gently scrub and rinse with clean water.
Disinfection: After all parts are cleaned, 75% medical alcohol can be used for disinfection, or high-temperature steam sterilization can be used to ensure complete sterilization.
Inspection and maintenance: During the cleaning process, pay attention to observe whether the components are worn or deformed. If damaged, it should be replaced in time to prevent leakage or failure to work properly.
Reassemble the lotion pump: After all parts are dry, reassemble the lotion pump in reverse order of disassembly. Make sure each part is installed properly and the pump moves smoothly.
Functional test: After the reorganization is completed, perform several pressing tests to check whether the lotion pump can work normally and pay attention to whether there is any leakage.
2. Maintain routine operation of the lotion pump
Periodic cleaning: Clean and maintain the lotion pump regularly based on frequency of use. It is generally recommended to perform a thorough cleaning at least once a week.
Avoid cross-contamination: Use different lotion pumps to dispense different types of products, especially avoid mixing products containing corrosive or strongly pigmented products with other products in the same pump.
Precautions for use: Avoid pressing too hard during use, which may cause damage to the lotion pump or product waste. At the same time, do not immerse the lotion pump in water for too long to avoid water seeping into the inside of the pump and affecting its normal use.
Maintaining and cleaning your lotion pump is an important part of ensuring product quality and user experience. Through regular cleaning, inspection, and necessary replacement measures, the service life of the lotion pump can be effectively extended, and unnecessary losses and risks can be reduced. By following the steps and tips introduced above, users can keep their lotion pumps in optimal condition and thus better enjoy the beautiful experience brought by cosmetics.
Material selection and application of lotion pumps
Uncovering the factors that affect the price of lotion pumps
Lotion pump user guide-detailed precautions
A complete guide to maintaining and cleaning lotion pumps
How to prevent lotion pump clogging
How to choose the right lotion pump for your product
Lotion pump sealing: discussion on leakage prevention technology
mia
topisren@sina.com
About Author
You may also like
-
What are the thickness options for PVC binding covers?
-
Is Your Truck Ready for the Future with LED Displays?
-
Is Duplex Stainless Steel Tube the Future of Industrial Piping?
-
Adalimumab Biosimilar: A Promising Alternative to Expensive Biologics
-
Bridge Plug Dissolvable Rubber: An Efficient Tool to Improve the Efficiency of Oilfield Completion Operations