Specifications
|
Item |
Dual-Chamber Suck-Back Valve |
|
|
Size |
6.35x4.35 6x4 |
|
|
Working luid |
℃ |
5~90 |
|
Proof pressure |
Mpa |
1.0 |
|
Working pressure |
Mpa |
0~0.5 |
|
Valve seat leakage |
cm³/min |
0(water pressure) |
|
Back pressure |
Mpa |
0 |
|
Ambient temperature |
℃ |
0~60 |
|
Switching frequency |
Times/min |
<10 |
|
Fitting Direction |
Any Direction |
|
|
Cv |
0.161 |
|
|
Operating Pressure |
Mpa |
0.3~0.5 |
|
Maximum drip prevention |
amount mL |
0.391 |
Notes
1. Air consumption is the value at an operating pressure of 0.4 MPa.
2. Reference value (varies depending on suction speed, piping configuration, luid type, etc.).
3. The suction volume can be adjusted by rotating the handle.
4. If the suction volume is set too low, the valve may fail to seal properly due to handle rotation.
www.topairsys.com
Xinruiwei Semiconductor Technology (Suzhou) Co., Ltd.
About Author
You may also like
-
VAV Boxes for Cleanrooms: How Variable Air Volume Control Balances GMP Compliance & Energy Savings
-
VAV Terminal Guide: Key Pitfalls Engineers Must Avoid
-
How To Check If A Quantum Diamond Supplier Is Legitimate
-
Flexible Ceramic Heating Pads: 50-Reuse PWHT Solution Guide
-
How Compact Substations Improve Power Distribution in Urban and Industrial Areas